Want a undisturbed meeting environment? Or make sure students can’t search for answers online during exams? The upgraded desktop smartphone and WiFi blocker can do it with one click!
It is equipped with a 10-channel built-in omnidirectional antenna, which can block mobile phone, WiFi and other signals within a range of 5-40 meters in all directions and at multiple angles. The signal indicator on the panel allows you to see the current working status at a glance.
The “heart” of this T-US-NZ10 is the original IC chip and integrated circuit developed, which makes the entire device run more smoothly and stably, and also extends its service life. With it, you don’t have to worry about it breaking after a few uses, it will accompany you for a long time!
Its shell is made of high-strength, impact-resistant, lightweight and durable ABS plastic. Whether it is often moved around or accidentally touched occasionally, it will not be easily worn out. At the same time, it has a remote switch remote control, which is more convenient to use.
Worried about overheating? No need at all! The device has a built-in powerful fan, and ventilation holes are designed on both sides and the back. Even if it runs for a long time, it will not suddenly stop due to excessive temperature.
The cell phone and wifi jammer T-US-NZ10 has a strong sense of scene. It can not only be placed on the desktop for use, but also the added wall-mounted hole allows it to appear on the wall (the best effect is 1.8-2m from the ground), saving space and perfectly integrating into various usage environments.
Interference Frequency：
| Output Port | Frequencies Scope |
| GSM 900 | 925-960 MHz |
| CDMA 800 | 860-894 MHz |
| PCS | 1930-1990 MHz |
| 3G | 2110-2155 MHz |
| 4G LTE 2300 | 2350-2360 MHz |
| 4G LTE 2500 | 2496-2690 MHz |
| 5G | 3400-3600 MHz |
| WiFi 2.4G | 2400-2484 MHz |
| WiFi 5.2G | 5150-5350 MHz |
| WiFi 5.8G | 5725-5850 MHz |
What if the blocking distance is short or ineffective?
1. Check whether the jammer is placed in the center of the signal source and minimize physical barriers (such as walls and other large obstacles).
2. If the range to be shielded is too large, multiple devices can be used to operate together to ensure that every corner is covered.
3. Check whether there are strong signal sources nearby (such as base stations, etc.), and try to stay away from these signal sources to reduce interference.
4. Ensure that the cooling system (fans and vents) inside the jammer is working properly, and regularly clean the dust from the vents and fans to prevent overheating from affecting performance.
Parameters:
* Average output power: 3-5 watts
* Total output power: 50 watts
* Operating temperature range: -40℃~75℃
* Relative humidity: 35~85%
* Power consumption: ≤ 240 watts
* Power input: AC110~240V
* Power output: DC 24V/12A
