After the unremitting efforts of designers, we finally developed an integrated portable signal jammer with more powerful functions and better performance under the premise of quality assurance, which can interfere with WiFi signals, mobile phone signals and even GPS satellite signals at the same time. This means that our new 10 omnidirectional antenna scrambler can block more frequencies, enabling you to achieve multiple functions in one product.
It is not inferior to the desktop mobile phone jamming equipment at all and is equally powerful, but its weight and size are less than half (the size is only 14 x 4 x 8 CM and the weight is 240G). With the same quality and functionality, you would definitely prefer a product that is easy to carry. This is also carefully designed according to the needs of different people for different places of use.
When the signal blockers are working, all ten frequency bands will be blocked. Any signals you don’t need will not be able to disturb you within the range of influence (centered on the jammer, with a radius of 20 meters).
You can refer to the jamming frequency range of this signal blocker to see if the following 10 blocking frequency bands are what you need:
Channel 1 (Wi-Fi 2.4G: 2400-2500MHZ)
Channel 2 (Wi-Fi 5.2G: 5150-5350MHZ)
Channel 3 (Wi-Fi 5.8G: 5735-5850MHZ)
Channel 4 (5G: 617-652MHZ)
Channel 5 (4G LTE USA iPhone: 700-800MHZ)
Channel 6 (3G: 2110-2170MHZ)
Channel 7 (CDMA: 851-894MHZ)
Channel 8 (GSM: 925-960MHZ)
Channel 9 (DCS: 1805-1880MHZ)
Channel 10 (GPS: 1570-1580MHZ）
Having it means you are able to jam the signal reception of all mobile phones within the frequency range. As long as it is within the signal interception range of the blocker, there is no possibility that the wifi router can perform its task. Surprisingly, it can easily block GPS satellite signal reception in the vehicle. As long as the signal isolator is functioning properly, common devices in the frequency ranges mentioned above will not function properly.
Please don’t worry about installation and use.
The 10 interference antennas are marked with numbers in sequence. You can install the antenna interface number corresponding to the antenna number.
Turn on the power switch, turn on the dip switch, and observe whether the indicator light on the host lights up normally. If you encounter an indicator light that does not light up, please follow the correct steps and try a few more times. If there is still no change, please contact our official customer service team in time and we will solve the problem for you as soon as possible.
(We provide you with a 12-month warranty, starting from the date of delivery.)
Product specifications:
Power supply: 50~60Hz
Power adapter: AC 110-120V
Voltage: DC 12V
Package contents: Jammer x1, power charger x1, car charger x1, power cord x1, antenna x10.
